Skip Navigation Website Accessibility

FOLLOW US...    
 


An optional machine specific custom insert for Gidget II can be ordered for many sewing machine models on our Custom Machine Insert page.

Will this cabinet fit my machine?
Click the Cabinet Specs/Incompatible Machines Tab for detailed Gidget II dimensions, including machine opening size and a list of known Incompatible Machines.

Watch our “Sturdy Gidget” video on the Product Videos Tab for a comparision of Gidget II and Gidget I.

Questions on the difference between the Gidget I and Gidget II tables:

  • Gidget I has a smaller opening size (17 1/2″ x 7 3/8″)  compared to the large opening on Gidget II (23 1/2″ x 12″).
  • Gidget II features 2 wheels for easier portability when folded flat.  Gidget I does not have wheels.
  • Gidget I is made of particle board with steel locking legs.  Gidget II is made with denser MDF (medium density fiberboard) and steel locking legs.
  • Gidget II will require a custom made insert for her opening.  Gidget I has a smaller opening, so there may not be a need for an insert if your machine is deep enough to fill most gaps.

Visit our FAQs page for answers to typical customer questions, as well as information on our Product Warranty.

The Assembly Manual/Videos Tab has 2 helpful PDFs and a video explaining how to use Gidget II.

  • Dimensions Open: 40-1/4” wide x 19-3/4” deep (front to back) x 28-1/2” tall
  • Dimensions with Legs Folded: 40-1/4″ wide x 19-3/4″ deep (front to back) x 4-1/2″ high
  • The Gidget II Table will accommodate sewing machines no larger than:
    • 23-1/2” wide
    • 12-1/4” deep (front to back)

* Please measure your machine and include knobs, plugs, etc. that extend beyond the body of machine.

  • The platform is adjustable for different heights of machines.
  • Construction: Melamine/MDF with Steel Legs
  • Manual Platform Weight Limit: 45 #s

The following machines will not fit or are not recommended.

Baby Lock

  • Destiny

Brother

  • Dream VX8500D

Janome

  • Horizon Memory Craft 15,000
    The machine will fit the platform however, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.

Elna

  • eXpressive 920
    The machine will fit the platform however, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.

*These machines are ones that have known fit issues. Please be advised that this list will change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.

Contact Us:

Phone: 434-645-7780
Address: 125 W. Carolina Ave
                Crewe, Virginia 23930
Hours: Tues & Thurs  Noon-5, Fri 11-4, Sat 9-1
            Closed Sunday, By Appt. Mon 
Weds 10am to 2pm(new hours)



FOLLOW US ON...